Brayt T1 Extra Cut – Polishing compound

CAD18.00CAD55.00

In Stock
SKU: N/A Category:

Description

Description

BRAYT T1 EXTRA CUT is a polishing compound suitable for use on all types of lacquers in automotive sector, including hard, scratch resistant lacquers (also ceramic lacquers). Product recommended for fresh and old paint coatings. Easily removes scratches and traces from P1500 sanding paper. Silicone free, no fillers.

  • Cut level 9/10
  • Gloss level 6/10

To obtain higher gloss use BRAYT T2 ANTIHOLOGRAM & MICROSCRATCH REMOVER in the second polishing step.

Advantages

  • Quickly removes sanding traces from 1500 grit
  • Very economical in use
  • Does not contain silicone or fillers
  • Suitable for use on fresh and fully polymerized paints
  • Easy to use
  • For machine or manual processing
  • Suitable for all types of coating

Processing

  • manual work
  • mechanical work (rotary polisher)

 

  • Recommended applicators
    • BRAYT POLISHING FOAM HARD yellow
    • BRAYT POLISHING FOAM SOFT grey
    • BRAYT LAMBSWOOL „D” yellow
    • BRAYT LAMBSWOOL „MM” white
    • OTHER APPLICATORS AVAILABLE IN BRAYT POLISHING SYSTEM
  • Application
    • On hard and scratch-resistant lacquers, use the compound with a lambswool or hard polishing foam.
    • Apply small amount of polishing compound on the polishing pad or surface to be treated.
    • When using a new polishing pad, it is recommended to apply the compound on the applicator and pre-polish the surface.
    • Polish with a rotary polisher in a speed range of 1200 – 1600 RPM, applying light or medium pressure
    • Polish until all scratches have been removed.
    • Remove all polishing compound residue using microfiber cloth.
    • When polishing large surfaces, it is recommended to polish smaller sections at a time.

    To obtain higher gloss use BRAYT T2 ANTIHOLOGRAM & MICROSCRATCH REMOVER in the second polishing step.